CM2 SPD Flash (China Miracle 2 Spreadtrum Flash) is a tool used for flashing devices that use Spreadtrum (SPD) chipsets. Spreadtrum-based devices are common in budget smartphones, and CM2 provides a specialized solution for flashing, repairing, and unlocking such devices.

Here’s a step-by-step guide on how to use CM2 SPD Flash to flash a device:

Prerequisites:

1. CM2 (China Miracle 2) Dongle: Make sure you have the CM2 dongle activated, as CM2 requires it for flashing. If you don’t have it, you'll need to purchase one.
2. CM2 SPD Tool: Download and install the CM2 SPD Flash Tool. You can find it in the CM2 official forums or on trusted sources.
3. Spreadtrum USB Drivers: Install Spreadtrum USB drivers on your computer so that it can recognize your device.
   • Download Spreadtrum USB drivers from trusted sources like the CM2 official website or from other reputable forums.
4. Firmware (Stock ROM): You need the correct Spreadtrum firmware for your device. This includes a PAC file, which is the file format used for flashing SPD-based devices.
5. Backup Your Data: Flashing your device will erase all data, so it’s important to back up contacts, apps, and other important files before proceeding.

Steps to Flash Using CM2 SPD Tool:

Step 1: Install CM2 SPD and USB Drivers

• Install CM2 SPD Tool: Download the CM2 SPD Tool and extract it to a folder on your PC.
• Install Spreadtrum USB Drivers: Install the necessary Spreadtrum drivers to ensure that your device is recognized when connected.

Step 2: Launch CM2 SPD Tool

• Open the CM2 SPD Flash Tool by running the CM2_SPD.exe file in the extracted folder.
• Make sure that your CM2 dongle is connected to the PC and properly activated.

Step 3: Load the Firmware (PAC File)

1. Click on "Select PAC" in the CM2 SPD Tool.
2. Browse to the folder where the PAC file (the firmware) for your device is located and select it. A PAC file contains the necessary firmware and instructions for the flashing process.
3. After selecting the PAC file, the CM2 SPD tool will load the necessary partitions (like boot, system, etc.).

Step 4: Choose Flashing Options

1. Erase User Data (optional): If you want to wipe all data on the device before flashing, check the "Erase User Data" option.
2. Format + Flash: If you want to fully format the device before flashing the firmware, you can select the "Format + Download" option. This will erase everything and install the new firmware.
3. Download Only: This option will only flash the firmware without formatting the device. Choose this option if you want to preserve data.

Step 5: Power Off the Device

• Turn off your Spreadtrum device completely before proceeding with the flashing process.

Step 6: Connect the Device

1. Press and hold the Volume Up or Volume Down button (this depends on your device) to enter Boot Mode or Download Mode.
2. While holding the volume button, connect your device to the PC using a USB cable.

Step 7: Start Flashing

• After successfully connecting the device, click on the "Start" button in the CM2 SPD tool.
• The flashing process will begin, and you will see a progress bar in the tool.
• Wait for the process to finish. Do not disconnect the device or interrupt the flashing process.

Step 8: Completion and Reboot

• Once flashing is complete, you will see a success message or a green checkmark in the CM2 SPD tool.
• Disconnect your device from the PC.
• The device will automatically reboot after flashing is completed.

Step 9: Initial Setup

• Once the device boots up, go through the initial setup process (language, Google account, Wi-Fi, etc.).

Troubleshooting Tips:

1. Device Not Detected: Ensure that Spreadtrum USB drivers are installed and that you have connected the device in Download Mode. Try using a different USB cable or port.
2. Flashing Process Stuck: If the process is stuck, ensure you are using the correct PAC file for your specific device model. Recheck the firmware and the PAC file.
3. Boot Loop After Flashing: If your device is stuck in a boot loop after flashing, try flashing again with a different firmware version. You may also need to perform a hard reset from the recovery mode.
4. CM2 SPD Not Launching: Ensure your CM2 dongle is activated and properly connected to your PC. If not, you may need to update or reinstall the tool.

Important Notes:

• Data Loss: Flashing will wipe all data from your device, so always back up before proceeding.
• Correct Firmware: Ensure the PAC file you are flashing is specifically for your device model and chipset to avoid issues like bricking your device.
• Warranty: Flashing your device may void your warranty, so consider this before proceeding.
• Dongle: The CM2 tool requires a dongle for activation, so ensure it's properly connected to your PC.

Download