If you're looking to flash or repair the ENG QCN (Engineering QCN) on your Xiaomi Redmi Note 9 Pro, this typically refers to the QCN file (Qualcomm Calibration Network) used for repairing network-related issues such as IMEI, baseband, or other connectivity problems on Qualcomm devices.

QCN files are important for restoring or repairing the device's IMEI and other network-related settings. It's used mainly in the engineering process when troubleshooting network problems or unlocking the device.

Here is a general guide on how to restore or flash the ENG QCN on a Xiaomi Redmi Note 9 Pro using the Qualcomm Tool:

Prerequisites:

1. QCN File: Make sure you have the correct ENG QCN file. This file contains calibration data for the device, and it's specific to your device model and network.

   • You can either extract the QCN file from a working device or use a specific one designed for the Redmi Note 9 Pro. (The QCN file must be specific to your phone to avoid issues like signal problems.)

2. Qualcomm USB Drivers: You need the appropriate Qualcomm USB drivers installed on your PC for proper device detection.

   • You can download Qualcomm drivers from trusted sources such as Qualcomm’s official website, or other developer forums like XDA.

3. QDLoader/Deep Flashing Mode: You will need to put your Redmi Note 9 Pro in Qualcomm EDL (Emergency Download) mode, also known as Deep Flashing Mode.

   • This mode allows you to connect to Qualcomm devices for flashing purposes.

4. QPST Tool (Qualcomm Product Support Tool) or Qualcomm MSM Download Tool: These are the tools that allow you to interact with Qualcomm devices and flash or restore QCN files.

5. Backup Data: Flashing the QCN file may overwrite existing network settings, so it's important to back up any necessary data before proceeding.

Download